Sleeve cutting is a very important part of the world of fashion design. A good sleeve not only gives a perfect fit to the clothes but also enhances the beauty and confidence of the wearer. Whether you are making a blouse, kurta, or any western dress, it is very important to know the correct sleeve cutting pattern.
Meaning of sleeve
In sewing, “sleeve” refers to the part of the cloth that covers the arms.
The design and cutting of sleeves in any dress can change the look of the entire dress. Therefore, it is very important to know its correct measurement and cutting technique.
Sleeves meaning in Hindi
यह वह कपड़े का हिस्सा होता है जो कंधे से लेकर कलाई तक हाथ को ढकता है। यह किसी भी परिधान जैसे शर्ट, ब्लाउज़, कुर्ता, गाउन, जैकेट आदि का महत्वपूर्ण हिस्सा होता है।
उदाहरण के साथ समझें:
Shirt Sleeves = शर्ट की आस्तीन
Full Sleeves Kurti = पूरी बांह वाली कुर्ती
Sleeveless Top = बिना आस्तीन का टॉप
Sleeve Cutting for Blouse and Suit
Blouse sleeves are mainly of two types:
- Plain sleeve
- Designer sleeve
Blouse sleeves are usually short (cap sleeve), elbow-length, or full-length. While cutting blouse sleeves, you will need the following measurements:
- Sleeve length
- Sleeve circumference
- Sleeve depth or armhole depth
- Sleeve Bicep
Sleeve cutting method:
- Fold the fabric (in two layers).
- Mark the length and depth of the sleeve.
- Make the armhole curved.
- Shape the bottom part according to the circumference of the arm.
- Add the seam allowance and cut.
Pro tip: Drafting and cutting of sleeves are done in two ways. Deep neck and normal neck in a suit or blouse. Here, we assume the height of the sleeve cap to be 4 ya 4.5 inches in a normal neck. And in the deep neck, we do the cutting as per the formula given below. Be it a suit or a blouse. Different formulas work for both normal neck and deep neck.
Sleeve Cutting Formula | Formula for Correct Measurement
Some basic formulas are followed for correct sleeve cutting. These formulas are very useful, especially for beginners.
Basic formula for sleeve cutting:
- Sleeve cap height = Chest ÷ 12 + 1.2 inches extra margin (We can increase or decrease it according to the arm hole measurement.)
- Sleeve = (bust measurement ÷ 6) + 1.2 inches + extra margin (Example: If chest is 36, | 36 ÷ 6+.5 = 6.5 + 1.1/2 inch = 8″). We can increase or decrease it according to the arm hole measurement.
- Arm round = Armhole round ÷ 2 + extra margin (Example: 16 ÷ 2 = 8 inches + extra margin
- Sleeve crease = Sleeve roundness ÷ 2 + 1.1/2 extra margin
Using these formulas, you can create precise and professional fitting sleeves.
If you are interested in sewing and want to learn a lot, or want to see videos of Austin cutting, then you must visit our YouTube channel, Meena Boutique
Different types of sleeves and their cutting tips
- Cap sleeves – These are short sleeves that barely cover the shoulders.
- Half sleeves – Generally used in blouses or shirts.
- Full sleeves – Useful in traditional attire or winter clothes.
- Bell Sleeves – Flared towards the bottom, giving a modern look.
- Puff Sleeves: Fluffy sleeves that are flared near the shoulders.
The cutting pattern for each type of sleeve may be slightly different, but the basic formula remains the same. Tips for Perfect Sleeve Cutting
Always take the correct measurements – shoulder, arm circumference, sleeve length
- When cutting sleeves, pay attention to the curve of the armhole
- Check by making the pattern on a trial fabric
- Add gathers or darts to designer sleeves
- Press the fabric before stitching
Sleeve Cutting in Modern Fashion
Sleeves have a huge contribution to today’s fashion. The look of sleeves is becoming the center of attraction in designer blouses, gowns, kurtis, and even pant suits. This is why sleeve cutting is an important skill for fashion design learners.
Conclusion
Sleeve cutting is a very important and creative process in the world of tailoring. A precise cut not only enhances the beauty of the clothes but also makes the wearer look stylish. It also gives you confidence.
Whether you want to learn sleeve cutting for a blouse or make sleeves for a designer gown, using the right pattern and formula can give you great results.
